Description Application method: Spray one surface with the activator. Apply the adhesive drop by drop to the other surface. Bring the two parts together and press for at least 1 min. Cleaning: Uncured Mitre Kit 2C can be removed from substrates and tools with Adhesive Remover 90A. Cured Mitre Kit 2C can only be removed mechanically. Repair: With the same material. Health- and Safety Recommendations Take the usual labour hygiene into account. Take care not to have glue between fingers or eyelids. May cause serious eye damage. Keep out of reach of children. Consult label and material safety data sheet for more information. Remarks After using, clean nozzle and tube with a needle and close the cap. Product can be used without activator but will cure much slower. Shelf life At least 12 months in original, unopened packaging at a cool and dry storage place, between 5°C and 25°C. Store frost free Substrates Substrates: several close-fitting surfaces Nature: rigid, clean, dry, free of dust and grease. Surface preparation: No pre-treatment required. We recommend a preliminary adhesion test on any substrate.
